資訊詳情

White cast iron and wear/abrasion resistant castings

2019/06/19 14:26
瀏覽量
評論:

White cast iron displays white fractured surfaces due to the presence of an iron carbide precipitate called cementite. It is too brittle for use in many structural components, but with good hardness and abrasion resistance and relatively low cost,

     White cast iron castings possess high strength and excellent wear resistance. They are used in wear resistant applications such as grinding balls and grinding rings in coal pulverizers and grinding table segments, grinding roller liners, grinding table liners in vertical roller mills, teeth of a backhoe’s digging buckets, shell liners and lifter bars in grinding mills.

     Wear/abrasion-resistant irons can be classified into five groups but the majority of castings used today are in two groups. One is the nickel containing alloys, known as Ni-Hard. The second white iron group contains high levels of chrome and is commonly referred to as Hi-Chrome iron. When toughness, abrasion-resistance and possibly corrosion resistance are required, the Hi-Chrome group of white irons is superior to Ni-Hard.

     15% and 25% Hi-Chrome alloy iron is typically used in applications of wear resistance and long term heat resistance, such as impellers, turbines, and grinding applications. The iron expresses a very hard surface. These high-chromium alloys attribute their superior hardness to the presence of chromium carbides. The main form of these carbides are the eutectic or primary M 7 C 3  carbides. The eutectic carbides form as bundles of hollow hexagonal rods and grow perpendicular to the hexagonal basal plane. The hardness of these carbides is in the range of 1500-1800 HV.

      Ni-Hard is a white cast iron, alloyed with nickel and chromium suitable for low impact, sliding abrasion for both wet and dry applications. Ni-Hard is an extremely wear resistant material, cast in forms and shapes which are ideal for use in abrasive and wear environments and applications.

      Ni-Hard castings are produced with a minimum of 550 Brinell hardness. Hard white cast iron containing 4% Ni and 2% chrome, used for abrasive resistant and wear resistant applications in the industries of mining, earth handling, asphalt, manufacturing, and so on. Ni-Hard parts and components extend the life of products when compared to other cast iron or mild steel cast components. Ni-Hard castings are typically used in power generation, brick, asphalt, cement, concrete, rock, sand and gravel industries.

      The grinding parts, grinding roller tyres and grinding table segments, are made from white cast iron (nickel chromium alloy). The grinding surface of the grinding roller tyres and of the grinding table segments are subject to wear due to the grinding operation. Because the material is very hard and sensitive to thermal shock, therefore, these grinding parts must prevent from collision, impact and heated.

     For more information, Please visit: https://www.wearresistantcasting.com/

 

2018/10/18 下午10:08:55

  公司以生產冶金,礦山,建材,電站,制粉,破碎設備用耐磨白口鑄鐵備件為主業,同時還生產各種高中低合金鋼鑄件,高錳鋼鑄件,銅合金鑄件,其中,最大鑄鐵件單重20噸,最大鑄鋼件單重10噸,年生產能力10000噸。
      公司主要生產設備有0.5噸、3噸、10噸中頻爐,10噸離心機和樹脂砂造型線。機械加工設備有:1.6米立車、2.5米立車,3.5米、5米、8米數控立車,?160、200、220鏜床、2.5×8米龍門銑,C6110數控臥車,80搖臂鉆等。理化檢測設備有:SPECTRO直讀光譜儀、HB-3000E臺式硬度儀、金相顯微鏡、超聲及磁粉無損檢測儀。

可信組件

地址:遼寧省沈陽市于洪區大興朝鮮族鄉大興村  郵編:110149  電話:+86-24-89327066 89327333  傳真:+86-24-89327111
版權所有:沈陽工大重型設備制造有限公司  
網站建設:中企動力 沈陽
《中華人民共和國電信與信息服務業務經營許可證》編號:遼ICP備05007835號

可信組件
(^ω^)MG宝石之轮爆分技巧 排列5预测最准十专家预测 复式二连三连码组数计算 开奖 现金打鱼送32可提现金 上海快三中奖助手 深圳风采开奖号码查询 456游戏app 免费大众麻将 网络棋牌游戏赚钱方法 长春麻将免费游戏大厅 福建22选5兑奖规则 博彩游戏 蓝洞棋牌正式版 佳佳山东麻将苹果版 温州麻将打法 重庆麻将换三张怎么看骰子